Originally posted by Thinkmoto:
If you have the right calipers you'll be able to just get the offset brackets and run the stock calipers. BUt you need the right calipers first off!!!! look at your calipers on the backside of the piston housing it should be finned, if it is you got the later smaller/cheaper calipers. order some V6 four wheel disc cougar caliper brackets. get some 278mm rotors and your set. I'd reccomend gicing the Stazi rotors/pads a try. I haven't hear anything bad about them...kinda wish I bought them instead of the KVR's.
you lost me here...i was under the impression that the later csvts used the same front calipar that all contiques used up front??? they just had a larger mounting bracket to clear the larger rotor, am i wrong?? if so this whole time i've been thinking that all i need is the calipar bracket off of one of those cars, and that it would work with my 96 se front calipars.....  
"Youth ages, immaturity is outgrown, ignorance can be educated, and drunkenness sobered, but STUPID lasts forever."-Aristophanes.
--93 pgt,headers,intake,borla=14.9 1/4mile
| 
