Originally posted by SVT Driver627:
Originally posted by svt4stv:
Originally posted by SVT Driver627:
Originally posted by cawong11:
Originally posted by 98_HO_Contour:
Do you need to/should do a front camber kit with the BAT setup?



We're not running the camber kit, no more wear on the front tires than is typical for any Contour. Saying that, it wouldn't hurt to have a set installed while your doing the suspension, just added insurance that you will get a good alignment.



Although a camber kit isn't absolutly neeed sometimes it can't hurt, look on ebay, i got two camber kits (one for each front wheel) on Ebay shipped for a little less than $100. Cause the cost of a camber kit is less than the cost of one new tire.

~Alex



two camber kits, one for each wheel? i thought one camber kit was for the front (both wheels)



No, you need two camber kits, one per wheel. That's why i looked on eBay becaud it saved me around $50, normally a camber kit is about $75.



svt4stv, what SVT Driver627 ment to say was, by his definition, one camber kit is all the parts necessary for one wheel. The way I think of a kit, which is probably the same way you do, is for both wheels. That being said, you only need one kit. Since I was bored tonight and feeling nice,here is a link for you.

Alex 00 T-Red/Tan SVTC #1964/2150 167 HP @6800 153 TQ @3000 Sold- 98 'Tour SE 24V 5-spd 149 HP @5900 148 LB FT @4300