Well,

I finally got around to routing and trying out the remote air portion (aka big blue hose) of the remote air filter kit. I'm affraid all i can say is ehh.

Some folks said they had a difficult time getting the fender liner back in after installing the hose. I had no problems and though i would post a pic of the routing:



I've been running the filter without the hose for several weeks now, and i do like the filter. Sounds like a KKM so you get that sudo forced induction sound from under the hood.



At first I didn't hink i would be able to get the hose on the end of the filter due to the tight bend required and the lack of space, but with a little finagling i finally got it on. Well i lost bottom end right off the bat. MOst of my driving is stop and go so i never noticed any bennefit from having the hose attached. So, i pulled the hose back off in favor of the stop and go bottom end.

Anyone out there find a good funnel ram type end for the hose that will fit in a fog light opening? I've checked all the places i can think of and have yet to find one.


98 SE
BAT Big Brake Kit "C", Throttle Hang Fix, B&M Shifter, Lightly Cracked Secondaries, BAT Euro Handling Kit, 20% tint, Removed Ding Strips, ES Motor Mount Inserts, Borla CatBack, Apexi SAFC, HighTower Rear Brace, BAT 19mm rear bar, MSDS Headers & Y, AFE 20-35008 filter, ClutchMasters Stage 1, Fidanza FlyWheel, SVT T.B.
====OnOrder====
svt uppers and lowers,