To add a bit of fuel to the fire....
The knucles there are NOT Contour nor are they American Focus parts that I've ever used. The bolt spread is too far apart. The C/F SVT part is about 3.5", that one looks more like about 6".
My 'guess' is that the knuckle would fit the car. Strut, pinch bolts etc. as that one is likely a modified version of the common casting. But I'd also check the CV spline too.
If you were to put in on a Contour it would prove much simpler to put it ALL on and not try to make a new bracket.
Yes, you could do a bracket from the 6" to the 3.5" but I"ll bet you'd move the caliper over a bit too in order to fit it all. And encounter some bolt to knuckle issues. Either the Brembo caliper will hit the old knuckle or the bracket will move it all off plane etc. etc. For those who've dealt with this you know what I mean....
Get the center to center distance of the pinch bolts. Get the Strut ID and get the hub spline count. Then bid away!
