hey goonz the only problem i had was there is no place for the iat sensor to go into. Ok there are four pieces total. one is larger diameter for an insertion. The other 3 pieces are for smaller diameter insertions with tubing. I cut my pipe which had a total of 3 pieces, so i cut one insetion tube off. I drilled a hole and then inserted a gromit from a hardware store for about .25 cents. The hole i drilled was a 1/2 inch hole and i rouned out the whole i made alittle larger for the grommit to fit. I then slipped the IAT sensor in and vola!!! It worked great and it still works till this day. If you need any questions let me know!!
I highley recoment this cause everywehre i called they don't have our pipes anymore!!
