Y2KMondeoSVT:
The (computer) wire I used looked similar to the one on the right in your pic , but had 3 wires in it (red-<skip>-black-white) with a socket on either end (the same style socket) . I just popped any wires (from the black connector) out that didn't correspond with the back of the clock , and popped them the right spots . To make the needed 8-pin plug ,I simply used 2 CDROM-to-audio sockets stacked one on top of the other . Instant 8-pin connector  !
Good i'm gonna try the 2 CD-ROM-to-audio.
I also took, from a 97 tour at the scrapyard this connector.
[image] [/image]
[image] [/image]
But the clock bezel is not the same, it's the 2 or 3 pieces one. So i'm not sureif this connector can fit on the 98 clock. It's an 8 pins with 4 wires in it. It has another connector for the PATS. Do you think it will fit?
Nic.
Contour 99 MTX V6 fully loaded, stock with 110000km. Illuminated sunroof switch. About to do the mystique rear dome light conversion with eyeball dome light.
| 
