Problem with a P0402

Print Thread

Re: Problem with a P0402 #1166549 01/27/05 03:39 PM
Joined: Oct 2003 Posts: 88 South Bend, IN R Ra\/en OP CEG\'er
OP Ra\/en CEG\'er R Joined: Oct 2003 Posts: 88 South Bend, IN	Ok I did the Vac test and the car stalled when I did it. So the EGR itself is fine. Now I need to get to that DPFE Sensor and hoses. What is the easiest way to do that? Should I just start disconnecting hoses until I can get to it? Also what can I get to the bolts with? A driver, ratchet, wrench? Also I was wondering if that part at Autozone (EGR Valve pressure sensor) which I was thinking was the DPFE sensor, is actually the part. $53.99 for the part at autozone. Anyone got a price from a dealership? Is the $53.99 a good deal? Thanks. 98 Black Mystique LS Duratec V6 2.5L ATX K&N air filter, cleaned EGR, new Autolite double platinum plugs, magnacore wires, rebuit Sonnax valved VB, TSS, TPS. Mobil 1 5W-30

Link Copied to Clipboard

Contour Enthusiasts Group Archives Forums General Troubleshooting Problem with a P0402