Originally posted by FFE:
I used a plug u had to solder.
It's not the power supply since the power supply will run another xbox, and a working power supply won't run mine.
could be a cpu or board, I completely forgot to protect for ESD.(I know I'm a dumb *hit for not)
if you are talking about a header pin setup, u most likely used a bit much solder and got a few of the holes soldered together. a solder sucker should clear this up with some patience, at at worst you fried the board, at best, some time desoldering and you're fine.
FRAY usually has to do with a/v cables though...FRAG is what you should have been seeing if it was a major problem. i am kinda stumped.
~Andrew
2001 VW Jetta Wolfsburg Edition
20 valves of fury
| 
