i did mine awhile back 2% all around...
the trick was to use the water/lubricant mixture i put in a spray bottle, and just get it soaking wet, then stick it on there, you should be able to slide it around, and just squeege all the liquid out the top and wipe it off. they say you cant get it wet enough...hint hint. then i just took a ruler all around the edges as far as i could into the seals and cut it with a razor blade. worked out really good for me. i messed up like 5 times and wasted tons of film before i got it right though
!! the problems i had at the beginning was not cleaning the window good enough, and getting all the adhesive off from my previous failure. so basically, just use a ton of liquid~! i bought this stuff at walmart called "tint-on", you mix it 50/50 with water in a bottle. and i also bought the squeege and knife at walmart in the car section..
