To make sure the pulley would fit I had them increase overall diameter by 10MM. That still leaves about a 5-7mm space from the pulley to a bracket that over hangs the pulley. It should have enought room to actually increase the diamete by another 10MM.

I'm using a stock crank pulley and there is no noticeable effects on the steering.


David Zambrano
svt_mondeo at yahoo dot com
CSVT E1 #4808 - soon to be 400hp
You get what you pay for. All advice here is free.
http://www.geocities.com/svt_mondeo- my homepage