Originally posted by auiotour:I am confused, no high beams, but these are two different projectors. are aren't the same ones.
HTH. I dont know why this picture wasnt posted in this thread until now.
Originally posted by carraudio:Do you think it would be hard to fit them on a pre 98 housing? I would like to make my own lights.
You could probably squeeze the lowbeam into the lamp. The highbeam would run into clearance problems if it was installed into the stock lamp, thats why mine are mounted to a panel and the old headlamp is just there as a filler piece (the top of the high barely hides behind the hood). You would also need to remove all of the fluting on the lens so the projector would illuminate the things it is supposed to. PM me for pics of how I did mine, or search for a thread from me (around August) in Pics and Videos, the pics are still uploaded and still load. FWIW, Hella is supposedly coming out with a 50mm unit this year that would fit into the early lamps a lot easier. I dont know anything else about it though.
