Originally posted by ExDelayed: Swazo's setup is just like Skrillas.
Well..... they did other than my HL's were hightower'ized. But I now have 90mm highbeams added in along with some more mods
When people were shelling out too much $$$$ for this mod to be done for them, I did it myself for $125 I would not do this without cutting the lense off mainly because of all the debris that is made from the mods needed to allow the 90mm Hella units to be installed. Though, if one felt they could remove all of the plastic/dust particles and they weren't looking to paint their bezels....... it'd be worth attempting to avoid sealing issues some have encountered. Though I have only had one very minor leak that was easily fixed by double checking/touching up the black silicone used to seal them.
I decided against doing a how-to for this mod. Anyone that should be dabbeling in something like this should have a general idea on how, and if they needed help (there have been many who have asked me for a little info here and there...) they can ask me. I'm always willing to help out where I can....
Last edited by Swazo; 01/07/0501:47 AM.
2005 Ford F150 SuperCab FX4
1964 Chevrolet Impala SS
1998 CSVT: 354HP/328TQ @ 10 psi, now gone
I would not do this without cutting the lense off mainly because of all the debris that is made from the mods needed to allow the 90mm Hella units to be installed. Though, if one felt they could remove all of the plastic/dust particles and they weren't looking to paint their bezels....... it'd be worth attempting to avoid sealing issues some have encountered. Though I have only had one very minor leak that was easily fixed by double checking/touching up the black silicone used to seal them.
