Swazo's setup is just like Skrillas. You could probably install them from behind without ever having to seperate the clear lens from the reflector assembly. Dion installed both lowbeams and highbeams onto a carbon fiber backing plate for his (looks very hot). Josch put OEM HID (A6, IIRC) into his pre-98 housings and had to clear the lens out so the fluting wouldnt throw the light everywhere. Mine are installed into modded OEM lenses. To my knowledge, I am the only one (Contour/Mystique) who has the Hellas exposed to the elements. If you want to talk to either Swazo or Dion they are in Utah or So.Cal. Milan doesnt hang around here anymore, and I doubt he would help the CEG community with this info.
If you are looking for a place to buy the projectors,
90mm DOT Hellas, the most common lamp, they even have a matching foggie.
120mm DOT lamp, this is what, IIRC, Milan used in his personal setup.
P.U.M.A. doesnt list their Hellas on their website, but you can get the 90mm ECE lamps, and most likely the 120mm ECE units from them. Having gone through two sets of DOT 90mm pieces, and one set of ECE 90mm lamps, IMHO, the ECE pieces are the way to go for our cars, 98+ included. The beam pattern in tighter and the cutoff is razor sharp. Both the ECE and DOT versions will (should have) a new, flat cutoff shield created when they have HID installed.
