Originally posted by photodreamer:
thanks just finished it. strange how the bubble on the passenger side one was the size of the whole gauge, then the one on the drivers side was a bit off. i didn't have my proper driver for that adjustment screw but my hands are frozen so i will adjust in the morning.



Glad it worked out. BTW, make sure you check the horizontal (side to side) sweep (?) of the lights. Its the longer (other) torx screw, and adjusts the side to side of the beams. Best way (cheap and quick ) to DIY is to park on a level surface about 15-20 feet from a plain wall, and adjust the highbeams to bang on straight. This will automatically adjust the low beams so you wont dazzle other drivers.