Originally posted by morbid:
any chance you can get a metal tube that's the diameter of the through-bolt? I can't find one as thick as the stocker (just pipes and stuff). I'm not sure if there would be any negative affects from eliminating that play. Demonsvt was talking about using a smaller tube a year or so ago... not sure if he did it... or if anyone else has.
the stock tube is re-cast into the new mount, a machine shop prolly wouldn't charge you too much to have a tube turned to the diameters you want.
Originally posted by todras:
Just so you know the pre98 mounts are much different. They have the bolts riveted to them. Make sure you tell ppl this is for post 98 only or you're going to have a bunch of MM you can't use as core for others.
these are for post 98 only(thanks)
Originally posted by brapple:
edit: we are talking about the rear mount right?
yes
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
| 
