Well, having to do this after the stock cd player craped out on me, its not too hard. if you take out the glovebox(push in the back of the sides hard and pull) you will see the amp and it takes a few screws to take it out. do that and you will see some wires that plug in to it. find the ones that are 8 connected to a plug in and those are your speaker wire if i remember right and push the otherones outta the way except for the antenna wire. just take out the amp and connect the speaker wires to the cd player and that will tell you what speaker it is. there is also the radio wire to connect too. that should work but if not pm me and I will find out which wires they are for sure and walk you through it better. but totally disregard the amp as it just is in the way and serves a better purpose as a .12 guage target. but you are on the right track . good luck.
