Wheel brand and offset are only part of the picture. Spoke design is where the issues are.
1.10 rotor with FSL caliper require 35mm clearance
1.10 rotor with BSL6 caliper require 39mm clearance
1.10 rotor with BSL6n caliper require 29mm clearance
.81 rotor with FSL; 27mm
.81 rotor with BSL6; 33mm
.81 rotor with BSL6n; 23mm (aprox)
Pull wheel, flip over, place flat edge on hub section, measure down from flat edge to back side of spoke. X-Y coordiantes of sorts. This is where the caliper body sits. Do this from a begining radius of 4' to an outside radius of 6" from center bore. (i.e. about half the rotor diameter)
