Originally posted by Rogerm60:
Originally posted by Nic_ContourSE99:
You can't have the code for a CEL by checking the blinks the CEL do. It's like an airbag light or ABS, too many possibilities. You have to buy a code-reader or have someone read your code and tell us.
Nic.
The paperclip method works just fine, in fact I had so many issues when I got my 95 that I rigged a dash switch to the connector so I could check the codes from the pilot seat at any time (comes in handy during a storm).
for a 95 you can read the codes from the cel light, as the instructions say use a jumper and a test light is best, you can read the codes from the test light or the cel itself
- 95 Mystique LS - Zetec/5spd
- 99 Contour SeVT Sport - Duratec/5spd
Official NE-CEG Contour/Mustang Family
| 
