I have replaced the airbags. A real pain to remove the passenger side blown bag, but the new one went in without a hitch.
I find that the drivers side air bag, doesn't recess as much as I would like, but the horn works ok, I would like it to recess a bit more though, but can live with it for now. The error codes previously gotten for the bags now gone but...
I am now getting an error code indicating an internal thermal fuse is gone in teh dianostic unit (module)
Is there anywhere that I can get a cheap module unit, as they can be expensive.
I am also trying to fix / trace a problem (unrelated to the airbags) that the heater blower is not funtioning. Blower works fine as I pulled it out and tested it with a direct hookup to the battery and it runs full blast. So tonite I am hoping to figure if it is the + or ground that the blower is not receiving, I am hoping that the minus is missing as it would be an easy fix by just taping into the ground and running a new ground wire, but will see.
I also have to look at the molding around the driver seat belt as it was cracked during the air bag deployment incident, it is the molding on the wall between the front and back doors, hopefully can pick it up at the wreakers.