Originally posted by Aussie SVT:
A 1/4" spacer, and that's it, no divider? Will that even do anything - Terry?
I fail to see how anything that thin would make a difference.
A spacer would not make a difference by itself (metal anyway)
However you will easily need to move the TB more than 1/4" away from the proposed divider to clear the throttle plate at WOT. So a spacer will be needed. I highly recommend something that does NOT transfer heat. (so no metal) A spacer big enough the stock studs may need to be swapped out as well. Plus adjusting the length of the remaining intake assembly.
For the splitter I was thinking a thin aluminum plate (2mm) and stamp cut the divider in it.
Run a bigger TB to help out since the intake opening is larger...
