How does $75 shipped sound? It spent all of 10 minutes on the fuel rail. The only thing fooled with was that I turned the adjustment screw all the way in to see if it would fit, so it is probably set for 70 psi. Four turns out (exactly) will be the factory setting of ~45 psi.
No gauge, but there is a 1/8" NPT port (filled with a plug from the factory) for a fuel pressure gauge or a sender for an in car electric gauge.
The nice thing about this part (as opposed to the Kirban) is that it is rebuildable with a kit from Mr. Gasket.
Look for pics tomorrow. What vehicle are you planning on using it on?
