Pioneer makes pretty much one wire harness for all their decks. What CC sold you should be a wire harness adapter which you wire to the pioneer harness and plug into the factory harness. A basic ford harness adapter should be a gray and a black female which the factory gray and black male plugs into. There is a blue wire that comes out of one of the plugs from the adapter harness, this is your remote wire for the car. This wire is hooked up to the blue wire off the pioneer harness which you can hook up your amp wire to. DO not, I repeat do not just find a 12 volt source and attach it to the amp turn on wire. Make sure it is a switched power source so you don't run the battery down. Only do this if you can't figure out the wire harness. You can also try looking on the package the wire harness came in. But I'm pretty sure you have a blue wire on that pioneer plug. I hope that helps out and wasn't too confusing.
