Contour Enthusiasts Group Archives Forums General Troubleshooting Changed Plugs and now car wont start

There's 2 ground wires on the coil pack. Make sure they are both connected. The other end of the one on the passenger side of the coil is near the strut tower IIRC. Maybe one of the wires in the power plug to the coil primary circuit is loose in the connector or something. Make sure the insulation around those wires is not cracked or broken. If you're not getting a spark from the secondary circuit(to the plugs), it means your getting no voltage to the primsry circuit(the connector which plugs in to the coil pack). Hopw this helps some.