Originally posted by LilRedRocket:
How many watts? Depending on power, will depend on how to wire them. If you are working with, say 400 watts a peice, there should be no need to bridge anything, just hook em' up like you would a pair of light bulbs in a series circuit.



I am sorry, not sure how many watts, where can I find that information. BTW, my friend gave me this box, he is going overseas (military) for a year and said I could have them they are only like a year old, maybe a year and a half.

edit****

looked on the back of the sub and got the model number and did a quick search and found this


ROCKFORD FOSGATE RFP3410
PUNCH 10" 400W WOOFER
* Nominal Impedance: (ohms) 4 * Voice Coil Diameter-inch: (mm) 1-3/4 (44.5) * FS: (Hz) 32 * QTS: 0.447 * VAS-cu.ft:. (liter) 1.11 (31.5) * Xmax-inch mm) .51 (13) * SPL: (dB @ 1w/1m) 85.4 * Power Handling: (RMS) 200 * Power Handling: (Max) 400 * Mounting Dia.-inch: (mm) 9-5/16 (237) * Mounting Depth-inch: (mm) 5-3/8 (137) * Speaker Dis.-cu. ft.: (liter) 0.038 (1.09) * Sealed Box Vol.-cu. ft.: (liter) 0.75 (21.24) * Vented Box Vol.-cu. ft.: (liter) 1.0 (28.32) * Port Diameter & Length in.) (1) 3 x 13.25 * Port Diameter & Length cm) (1) 7.6 x 33.6

hope that means something to you they are both the same in the box. Both have the same model numbers.


Last edited by thejms; 10/06/04 12:04 AM.
Justin Schmidt 2000 SVT Tour #1620 of 2150 Born 1/15/2000