|
|
Joined: Sep 2003
Posts: 2,725
Hard-core CEG\'er
|
Hard-core CEG\'er
Joined: Sep 2003
Posts: 2,725 |
Originally posted by auiotour: Originally posted by HITMANinMI: Your resistor is shot. There is a thing in the FAQs about this. Anyways it is for 10 years or 100k, what your mileage?
If you have more than 100k click here
The nice thing it is only $12 and you can fix it yourself in 10 minutes, it is located on the passanger side footwell, up near the firewall.
I think all there is to unbolt two bolts, one wire, install new one and your good to go.
this isn't his problem as he can't move the knob either. If you can move the knob, then this is your fix. But his wires got to hot and melted in the inside of the harness causin the plastic inside the switch to melt, blocking the switch from moving. Read it carefully.
No, you read it carefully.
"the ol' AC and the fan speed control knob was set to high, so I tried to adjust it down and it was stuck. I gently jiggled the knob and eventually it moved to a lower position, but there's no airflow in any other position but high."
No airflow in any position but high, so the switch is working. It wont blow on anything but high, so the resistor is more than likely bad. He said the knob moved to a lower position, so the knob is working.
|
|
|
|
|
|