|
|
|
|
Joined: Mar 2002
Posts: 324
CEG\'er
|
OP
CEG\'er
Joined: Mar 2002
Posts: 324 |
Originally posted by Andy W.:
Spray PB blaster around the threads. Let is sit a while, maybe even a couple coats. Do not get it on plastic or rubber stuff. Tap it every once in a while to help the penetrating oil penetrate. Hit it on the hub between the studs but not in the middle.
When you install you new ones put some lithium or some other hit temp lubricant on the hub.
-Andy
p.s. PB Blaster and WD40 are not the same thing.
You didn't read my last couple of posts, I did exactly that. Everything is done now. I didn't have time to sit there and bleed the brakes along with it being dark out, so I am going to do that today. They aren't bad, the pedal action is a little low, so I am goign to go over that and bleed them a bit today. Thanx again for the suggestions guys!
|
|
|
|
|
|
|
