Hey guys.... thanks for the suggestions... if I cannot buy a hanger post from Ford, then my next option will be to find a wrecked Contour and cut the hanger off (if anyone is willing to donate, name your finders fee, etc as my resources are limited... no b.s. just a straight up offer to anyone who is generous enough to help). I plan on taking the car to the muffler shop to get the hanger welded in, but as far as the exhaust system goes, it is going in on my own muscle and my own time. I do my own mechanic work, but since I lack experience in welding, I am going to have to bite the bullet and take the car in at least to get the hanger welded on, if not to run the pipes in to get the joints welded. But the pipes will be removed and installed by me.
Xchang has an SVT.... so the OEM hangers were pretty much there for the mufflers. This is why I made a point of posting that my car was an SE which does not include that hanger on the passenger side or the heat sheilding for the muffler. Nice system, but not enough info... the enthusiasm to update us with technical specs and such seems to have died out. Plus, with an expensive Borla system a quasi dual is all I can afford right now (college budget) and cannot afford the extra cat, etc. Thank you all for your help.
