Yup, definetly no hydraulic presses and crazy construction. Basically, you'll have a positive and a negative terminal for each channel. Take the positive lead wire and fasten it to one of the channels. Then take the negative lead and fasten it to another channel. In essence you'll have one blank connection on each channel, but the power output will use power from both channels. It is as easy as changing the wires connection points. I have a Rockford Fosgate 4 channel that I bridged 2 channels to run a "10 sub and used the remaining two channels to run each individual 6x8 in the rear doors. If you have any more questions PM me.
