Originally posted by gearhead98:
ok i got a questions for you about your reasembly

did you oil the lifter really good before you put them back in???




Yes, what I did is i put some 10W-30 in a small container and as I was putting the lifters in, I would dip them in the oil and coat them really well before I put them in their bores. I followed the directions of the Haynes manual.

As to the other reply, you are talking about rocker arms, there are none. The camshafts sits directly over the lifters. When I say that the head was taken to a machine shop...What they did is pressure check the head to see if it was warped. They said it was slightly warped so they machined the mating surface. Also, they did a "valve job" and installed new valve seals and removed the carbon build up from the ports and combustion chamber.

95 Gl Zetec Atx