I am one of the first to have it on... Ok, the first... Check my mods page... Best and cheapest way to do it, is find a person that can bend piping and weld them... Follow the stock piping, but don't get too large of piping, or you'll lose velocity in the exhaust. My setup was from Terry Haines layout of the S/C Tour "Profile". Gonna change my H-pipe to an X-pipe soon. laugh

"I sense much beer in you....
Beer leads to intoxication, intoxication leads to hang over, hang over leads to suffering....., suffering leads to the dark side." -Chineseman 3:16

Steve Chang
99 Silver SVT #196 "ExtrudeHone"
Sponsored by Street-Concepts
174.2 fwhp @ 150.7 ft/lbs (218 hp @ crank) - Pre-Headers
SVT/SHO Society Vice President
XChang Designs