It should be the same on both sides. There should be a small C-clip over the end of the axle that holds it in place. You may have to jerk the axle abruptly, or use some kind of device to pop it out of the socket. The C-clip is the only thing that holds it in place though.
95 Contour Zetec, ATX (wrecked, sitting in the barn)
95 Mystique Zetec, MTX
2000 Taurus SEL 3.0L Duratec
1994 Crown Victoria LX 4.6 V8
1993 Chevy Silverado 4.3 V6
|