Hi, still new but learning.

Read this post
http://www.contour.org/ubbthreads/showflat.php?Cat=&Board=trouble&Number=651278&page=&view=&sb=5&o=&fpart=1&vc=1
In which overton had his problems and I thought
I had located mine down to the back of the switches on the
dash panel. Furthering the conversation of the wires if I run
a jumper from purple/blue wire to the purple wire and the
blower works. So I replaced the switch and it worked for a
couple of days and now nothing again. Same problem, if I run
a jumper the blower works fine This is really starting to
piss me off. Please help.

Thanks in advance.