Hey thanks for the questions.
At the time of dyno, I was running the standard LIM. I have the SVT with 34/35mm, and 19's, but have not yet installed it.
I will have it in during the week.
I did reset the ECU after I swapped over the UIM. I know for sure, cause I had the bat. unplugged for about an hour as I was swapping the UIM over!
The car is pinking and running slightly lean under part throttle, but under WOT the mixture is good.
The UIM which was max'd only has 30(31)mm primaries and 33/34mm secondaries. The figures vary by about 1mm cause the EH process does not lend itself to perfectlyu boring each port.
I have the SVT cams but the local racing mechanic who I trust to install them for me wants â?¬1000 for the labour. So at the moment, I cant afford to put them in
