|
Joined: Mar 2004
Posts: 340
CEG\'er
|
CEG\'er
Joined: Mar 2004
Posts: 340 |
Originally posted by Kremithefrog: Meangreen my first reply was nice,
I didn't ask the question...I gave an opinion, you gave an opinion...that should have been the end of it.
Quote:
though yes it discredited your opinion. I did it as nicely as possible though.
Why? There was nothing wrong with my advice, in this case, and it sure wasn't inaccurate advice that needed to be discredited in any way.
Quote:
Not only is it OK to have an opinion, it's OK if the opinion doesn't agree with someone else's.
It sure doesn't appear that it's OK with you.
Quote:
You have the right to disagree again with me and what not but you asked if I'm trying to start a fight, etc. I wasn't with the first post
Sure you were.
Quote:
but I don't really care now, because your opinion isn't needed in the zetec section.
Why is that, expert? Because your limited opinion is more needed than my ASE certified opinion/my 21 years of experience?
Your Zetec drain plug is so much different than my SVT's plug and it's location?
Because I have dozens of customers that have Zetec platforms, where I have replaced their T/Belts, Head/Gasket, Clutches, Alternators, Struts, Brakes, Exhausts, Drive Axles, Compressors, Heater Cores, Radiators, Evaporators, Emissions, Ignition Systems, Fuel Management...the list goes on and on.
Your knowlege surpasses that of mine, expert?
Quote:
We don't like people to discourage others from working on their cars. Sure he wasn't doing the right things, BUT that's why he posted on here, and we're here to point him in the right direction, which isn't a shop.
Maybe it should have been...remember, that's the guy that was yanking on his O2 sensor and draining his washer fluid, taking 6 hours to do it. I don't go around telling people to go to a shop, I give lots of DIYs advice that they can use for themselves, but this one concerned me.
Quote:
Noone is born mechanically inclined, but it's more of a learned skill that anyone can do following a book, a how-to, or someone's directions.
That's a load of crap, honestly. Could your mother out-wrench your dad? Can you out-wrench me? Can I out-wrench Sean Hyland? I know that you do have to be mechanically inclined to be good at it. I've seen mechanics that have worked on cars for 10 - 15 years and be blown away by kids that have been doing it for only 2 years. I know because I was once one of those kids that was always having to finish and/or re-do the brake jobs, window regulator jobs, carburetor jobs, tune-ups, etc of those guys that weren't really inclined to be in the profession, because they weren't qualified, really, and they never were able to ever retain anything that they had just learned and done.
Give your brain a chance, friend...everybody has their own skill-level.
Using your theory, everybody can learn to be a Mozart, everybody can ride bulls, everybody can benchpress 500lbs, everybody can win the lead role in La Boheme or Turandot, everybody could make an award winning soufflé, etc...all they need to do is follow a book, a how-to, or take someone's direction.
|
|
|
|
Joined: May 2004
Posts: 1,262
Zippy Zetec on his last legs.
|
Zippy Zetec on his last legs.
Joined: May 2004
Posts: 1,262 |
Originally posted by MeanGreen2: Originally posted by Kremithefrog: Meangreen my first reply was nice,
I didn't ask the question...I gave an opinion, you gave an opinion...that should have been the end of it.
Quote:
though yes it discredited your opinion. I did it as nicely as possible though.
Why? There was nothing wrong with my advice, in this case, and it sure wasn't inaccurate advice that needed to be discredited in any way.
Quote:
Not only is it OK to have an opinion, it's OK if the opinion doesn't agree with someone else's.
It sure doesn't appear that it's OK with you.
Quote:
You have the right to disagree again with me and what not but you asked if I'm trying to start a fight, etc. I wasn't with the first post
Sure you were.
Quote:
but I don't really care now, because your opinion isn't needed in the zetec section.
Why is that, expert? Because your limited opinion is more needed than my ASE certified opinion/my 21 years of experience?
Your Zetec drain plug is so much different than my SVT's plug and it's location?
Because I have dozens of customers that have Zetec platforms, where I have replaced their T/Belts, Head/Gasket, Clutches, Alternators, Struts, Brakes, Exhausts, Drive Axles, Compressors, Heater Cores, Radiators, Evaporators, Emissions, Ignition Systems, Fuel Management...the list goes on and on.
Your knowlege surpasses that of mine, expert?
Quote:
We don't like people to discourage others from working on their cars. Sure he wasn't doing the right things, BUT that's why he posted on here, and we're here to point him in the right direction, which isn't a shop.
Maybe it should have been...remember, that's the guy that was yanking on his O2 sensor and draining his washer fluid, taking 6 hours to do it. I don't go around telling people to go to a shop, I give lots of DIYs advice that they can use for themselves, but this one concerned me.
Quote:
Noone is born mechanically inclined, but it's more of a learned skill that anyone can do following a book, a how-to, or someone's directions.
That's a load of crap, honestly. Could your mother out-wrench your dad? Can you out-wrench me? Can I out-wrench Sean Hyland? I know that you do have to be mechanically inclined to be good at it. I've seen mechanics that have worked on cars for 10 - 15 years and be blown away by kids that have been doing it for only 2 years. I know because I was once one of those kids that was always having to finish and/or re-do the brake jobs, window regulator jobs, carburetor jobs, tune-ups, etc of those guys that weren't really inclined to be in the profession, because they weren't qualified, really, and they never were able to ever retain anything that they had just learned and done.
Give your brain a chance, friend...everybody has their own skill-level.
Using your theory, everybody can learn to be a Mozart, everybody can ride bulls, everybody can benchpress 500lbs, everybody can win the lead role in La Boheme or Turandot, everybody could make an award winning soufflé, etc...all they need to do is follow a book, a how-to, or take someone's direction.
here we go again...
Regards, Cole.
Relegating to troll status sometime this week.
New Whip: 1990 Lexus ES250.
Old Hotness: 1995 GL MTX Zetec *IN TRIAGE*
"I had a little friend once, but it dont move no more... "
|
|
|
|
Joined: Jun 2004
Posts: 3,065
Hard-core CEG\'er
|
OP
Hard-core CEG\'er
Joined: Jun 2004
Posts: 3,065 |
Well thanks everyone for the help- the supporters and the ones against me. The only reason that I drained the washer fluid was because I thought it was the bottom of the coolant res. I stopped immediately when I noticed the liquid coming out was blue, not green. Thanks again everyone.
|
|
|
|
Joined: May 2002
Posts: 21,653
I have no life
|
I have no life
Joined: May 2002
Posts: 21,653 |
Originally posted by MeanGreen2: Originally posted by Kremithefrog: Meangreen my first reply was nice,
I didn't ask the question...I gave an opinion, you gave an opinion...that should have been the end of it.
YES IT SHOULD HAVE, BUT YOU WENT AND MADE A REPLY TO MY OPINION THAT ASKED IF I WAS TRYING TO START A FIGHT, ETC. JUST TRYING TO ARGUE WITH ME RATHER THAN HELP THE GUY, WELL YOU WERE ACTUALLY NEVER TRYING TO HELP THE GUY, JUST SEND HIM OFF TO A SHOP.
Quote:
though yes it discredited your opinion. I did it as nicely as possible though.
Why? There was nothing wrong with my advice, in this case, and it sure wasn't inaccurate advice that needed to be discredited in any way.
YES THERE WAS SOMETHING WRONG WITH YOUR ADVICE, LET'S TRY TO HELP PEOPLE HERE, NOT SEND THEM TO A SHOP.
Quote:
Not only is it OK to have an opinion, it's OK if the opinion doesn't agree with someone else's.
It sure doesn't appear that it's OK with you.
IT'S OK, REMEMBER I JUST REPLIED WITH MY OPINION THEN YOU GOT ALL GRUMPY.
Quote:
You have the right to disagree again with me and what not but you asked if I'm trying to start a fight, etc. I wasn't with the first post
Sure you were.
NOT WITH THE FIRST POST, BUT WITH THE SECOND ONE, MAYBE.
Quote:
but I don't really care now, because your opinion isn't needed in the zetec section.
Why is that, expert? Because your limited opinion is more needed than my ASE certified opinion/my 21 years of experience?
Your Zetec drain plug is so much different than my SVT's plug and it's location?
Your knowlege surpasses that of mine, expert?
WELL, EXPERT? BECAUSE I'M TRYING TO HELP PEOPLE, NOT SEND THEM TO SHOPS, EXPERT?
THAT'S THE REASON WE DON'T NEED YOU IN THE ZETEC SECTION, BECAUSE OUR DRAIN PLUGS ARE ALL IN THE SAME SPOT, WE CAN DO A FIND JOB TELLING SOMEONE HOW TO FIND IT. WE DON'T SEND THEM OFF TO A SHOP, EXPERT?
AGAIN, MY KNOWLEDGE OF CARS MAY NOT SURPASS YOUR'S, BUT MY HELPFULNESS AND KNOWLEDGE OF OTHERS THINGS MOST LIKELY DOES, EXPERT?
Quote:
We don't like people to discourage others from working on their cars. Sure he wasn't doing the right things, BUT that's why he posted on here, and we're here to point him in the right direction, which isn't a shop.
Maybe it should have been...remember, that's the guy that was yanking on his O2 sensor and draining his washer fluid, taking 6 hours to do it. I don't go around telling people to go to a shop, I give lots of DIYs advice that they can use for themselves, but this one concerned me.
A LOT OF PEOPLE MAKE MISTAKES, YOU CAN'T LEARN WITHOUT MAKING MISTAKES,EXPERT?
Quote:
Noone is born mechanically inclined, but it's more of a learned skill that anyone can do following a book, a how-to, or someone's directions.
That's a load of crap, honestly. Could your mother out-wrench your dad? Can you out-wrench me? Can I out-wrench Sean Hyland? I know that you do have to be mechanically inclined to be good at it. I've seen mechanics that have worked on cars for 10 - 15 years and be blown away by kids that have been doing it for only 2 years. I know because I was once one of those kids that was always having to finish and/or re-do the brake jobs, window regulator jobs, carburetor jobs, tune-ups, etc of those guys that weren't really inclined to be in the profession, because they weren't qualified, really, and they never were able to ever retain anything that they had just learned and done.
Give your brain a chance, friend...everybody has their own skill-level.
Using your theory, everybody can learn to be a Mozart, everybody can ride bulls, everybody can benchpress 500lbs, everybody can win the lead role in La Boheme or Turandot, everybody could make an award winning soufflé, etc...all they need to do is follow a book, a how-to, or take someone's direction.
EVERYBODY CAN LEARN TO BE A GOOD COMPOSER, RIDE A BULL, BENCHPRESS A LOT (MAYBE NOT 500LBS, UNLESS THEY ARE BUILT BODY WISE FOR IT), ETC. IF YOU WANT TO DO SOMETHING, YOU CAN DO IT. OR YOU CAN HAVE YOUR ATTITUDE AND JUST TAKE IT TO A SHOP AND NEVER LEARN HOW TO DO ANYTHING FOR YOURSELF.
Sorry, was I yelling?
I really don't mind you being in the zetec section, but you gotta be more supportive/helpful of people to be accepted around here. Or you can continue just sending people to the shop and acting like you know everything about everything, expert?
98.5 SVT
91 Escort GT (almost sold)
96 ATX Zetec (i brake to watch you swerve)
FS: SVT rear sway bar
WTB: Very cheap beater
CEG Dragon Run - October 13-15
|
|
|
|
Joined: Mar 2004
Posts: 340
CEG\'er
|
CEG\'er
Joined: Mar 2004
Posts: 340 |
Originally posted by Kremithefrog: Originally posted by MeanGreen2: Originally posted by Kremithefrog: Meangreen my first reply was nice,
I didn't ask the question...I gave an opinion, you gave an opinion...that should have been the end of it.
Quote:
YES IT SHOULD HAVE, BUT YOU WENT AND MADE A REPLY TO MY OPINION
No, liar, you first made a reply to MY opinion. I never addressed your advice to the original poster [fact].
Quote:
THAT ASKED IF I WAS TRYING TO START A FIGHT, ETC. JUST TRYING TO ARGUE WITH ME RATHER THAN HELP THE GUY, WELL YOU WERE ACTUALLY NEVER TRYING TO HELP THE GUY, JUST SEND HIM OFF TO A SHOP.
I've told the guy where the drain is so he can try to do it himself...I also suggested that he get someone to take over, seeing that he spent over 6 hours, never finding one drop of coolant.
Quote:
though yes it discredited your opinion. I did it as nicely as possible though.
Why? There was nothing wrong with my advice, in this case, and it sure wasn't inaccurate advice that needed to be discredited in any way.
Quote:
YES THERE WAS SOMETHING WRONG WITH YOUR ADVICE, LET'S TRY TO HELP PEOPLE HERE, NOT SEND THEM TO A SHOP.
You've got a big problem, Beethoven. Some people aren't meant to work on their cars, even tho' they want to, even tho' you need for them to. I give out lots of advice, but in this situation, there was nothing wrong with telling the guy to find someone.
You'll be happy to know about all the DIYs that I've seen that you think could be the next Kiri Te Kanawa, with the right how-to book...
...burned up cars because they couldn't get the valve cover back on, so they drove around with it off...brake pads on backwards, shoes installed with all trailing shoes on one side of the car, all leading shoes on the other side...lugs nuts on backwards...vice-grips that were welded to the hood of a truck with a totally destroyed electrical system [during a simple battery replacement]...lost 4 fingers during a simple belt replacement...ruined strut assemblies and ruined brake lines because a guy thought he could do his own struts...he even threw away his anchor bolts for his seatbelts
If they're not smart enough to know what they're doing, they're not smart enough to know what they did right or wrong on the job. If they're lucky, they don't break too much more than what they're trying to fix...just messing up their car...at worst, they hurt themselves or others.
Quote:
Not only is it OK to have an opinion, it's OK if the opinion doesn't agree with someone else's.
It sure doesn't appear that it's OK with you.
Quote:
IT'S OK, REMEMBER I JUST REPLIED WITH MY OPINION THEN YOU GOT ALL GRUMPY.
It's not ok with you, because when you gave advice to the guy, I said nothing to you, but when I gave advice to the guy, you got all grumpy with me.
Quote:
You have the right to disagree again with me and what not but you asked if I'm trying to start a fight, etc. I wasn't with the first post
Sure you were.
Quote:
NOT WITH THE FIRST POST, BUT WITH THE SECOND ONE, MAYBE.
With the first post...that led to the second. I didn't jump on you for giving him advice, you jumped on me for giving advice.
Quote:
but I don't really care now, because your opinion isn't needed in the zetec section.
Why is that, expert? Because your limited opinion is more needed than my ASE certified opinion/my 21 years of experience?
Your Zetec drain plug is so much different than my SVT's plug and it's location?
Your knowlege surpasses that of mine, expert?
Quote:
WELL, EXPERT? BECAUSE I'M TRYING TO HELP PEOPLE, NOT SEND THEM TO SHOPS, EXPERT?
I give out lots of advice that DIYs can use for themselves, expert.
Quote:
THAT'S THE REASON WE DON'T NEED YOU IN THE ZETEC SECTION, BECAUSE OUR DRAIN PLUGS ARE ALL IN THE SAME SPOT, WE CAN DO A FIND JOB TELLING SOMEONE HOW TO FIND IT. WE DON'T SEND THEM OFF TO A SHOP, EXPERT?
Because your knowledge is about 1,000th as complete as mine, expert?
Quote:
AGAIN, MY KNOWLEDGE OF CARS MAY NOT SURPASS YOUR'S, BUT MY HELPFULNESS AND KNOWLEDGE OF OTHERS THINGS MOST LIKELY DOES, EXPERT?
You're the one that backed the cardboard and one-tooth off theory on timing belt replacements...correct?
How can your knowledge be so helpful, when it's so limited?
Quote:
We don't like people to discourage others from working on their cars. Sure he wasn't doing the right things, BUT that's why he posted on here, and we're here to point him in the right direction, which isn't a shop.
Maybe it should have been...remember, that's the guy that was yanking on his O2 sensor and draining his washer fluid, taking 6 hours to do it. I don't go around telling people to go to a shop, I give lots of DIYs advice that they can use for themselves, but this one concerned me.
Quote:
A LOT OF PEOPLE MAKE MISTAKES, YOU CAN'T LEARN WITHOUT MAKING MISTAKES,EXPERT?
At what costs amateur? A ruined engine, a person's health, a danger to others, a final cost that far exceeds a pro's original quote...a 20 hour drain and refill?
Quote:
Noone is born mechanically inclined, but it's more of a learned skill that anyone can do following a book, a how-to, or someone's directions.
That's a load of crap, honestly. Could your mother out-wrench your dad? Can you out-wrench me? Can I out-wrench Sean Hyland? I know that you do have to be mechanically inclined to be good at it. I've seen mechanics that have worked on cars for 10 - 15 years and be blown away by kids that have been doing it for only 2 years. I know because I was once one of those kids that was always having to finish and/or re-do the brake jobs, window regulator jobs, carburetor jobs, tune-ups, etc of those guys that weren't really inclined to be in the profession, because they weren't qualified, really, and they never were able to ever retain anything that they had just learned and done.
Give your brain a chance, friend...everybody has their own skill-level.
Using your theory, everybody can learn to be a Mozart, everybody can ride bulls, everybody can benchpress 500lbs, everybody can win the lead role in La Boheme or Turandot, everybody could make an award winning soufflé, etc...all they need to do is follow a book, a how-to, or take someone's direction.
Quote:
EVERYBODY CAN LEARN TO BE A GOOD COMPOSER, RIDE A BULL, BENCHPRESS A LOT (MAYBE NOT 500LBS, UNLESS THEY ARE BUILT BODY WISE FOR IT), ETC. IF YOU WANT TO DO SOMETHING, YOU CAN DO IT. OR YOU CAN HAVE YOUR ATTITUDE AND JUST TAKE IT TO A SHOP AND NEVER LEARN HOW TO DO ANYTHING FOR YOURSELF.
I never tell all people to go to the shop, Bach...very rarely do I give out that sort of advice, Julia Roberts...Alexander The Great, all I did was suggest that the guy might want to consider letting someone take over, seeing that he was yanking on the O2 sensor, while trying to find a **drain plug** for the radiator...Julia Childs, my advice wasn't that out of line...Prince.
Quote:
Sorry, was I yelling?
I really don't mind you being in the zetec section, but you gotta be more supportive/helpful of people to be accepted around here. Or you can continue just sending people to the shop and acting like you know everything about everything, expert?
I give out support/advice to DIYs, based on experience...exerience that you don't have, but that never stops you from always trying to correct me, George Foreman.
I'm not going to let someone like you pretend that you can discredit my knowledge, and try to dispute everything that I say, just because you have a problem with my profession and what I do with my exhaust systems...and because you have the silly attitude that any mother can fix any car or die trying mentality.
|
|
|
|
Joined: Mar 2004
Posts: 340
CEG\'er
|
CEG\'er
Joined: Mar 2004
Posts: 340 |
Originally posted by Matt R: Well thanks everyone for the help- the supporters and the ones against me. The only reason that I drained the washer fluid was because I thought it was the bottom of the coolant res. I stopped immediately when I noticed the liquid coming out was blue, not green. Thanks again everyone.
It sounds like you have the desire and the patience required to service your own car, just not the direction...buy a good manual. I think you'd soon discover what you feel like you're willing and able to tackle, and what you'd feel safer letting others do for you.
That applies to everybody at this group, I'm sure; even me.
Sure, I can fix almost everything on my machine, but I would never dream of trying to paint the thing...wouldn't even want to rebuild the transmission/transaxle...I'd pay someone to paint it and I'd buy a brand new transmission/transaxle and replace it myself, even if I had a *how-to book* on-hand.
Even in Kremits case...he may have replaced his own T/Belt, and has taken the pole-position of The DIY Brigade, but even he took it to a pro when it came time to replace his own cam gears/pullies, for whatever reason, even tho' he says he's got the right method for holding the pullies, and a how-to book at his side.
I didn't mean to come down on you, just thought that you might want to think about having someone else do it for you, at least until you have a good guide to go by, knowing what's required of you to do the job yourself.
|
|
|
|
Joined: Jun 2004
Posts: 3,065
Hard-core CEG\'er
|
OP
Hard-core CEG\'er
Joined: Jun 2004
Posts: 3,065 |
I understand MeanGreen, I will go out and get a manual. I was just hoping that by posting my problem on here, I would get some pics or detailed advise of where the plug was. Thanks though, I understand what you are getting at.
|
|
|
|
Joined: May 2002
Posts: 21,653
I have no life
|
I have no life
Joined: May 2002
Posts: 21,653 |
Originally posted by MeanGreen2:
Even in Kremits case...he may have replaced his own T/Belt, and has taken the pole-position of The DIY Brigade, but even he took it to a pro when it came time to replace his own cam gears/pullies, for whatever reason, even tho' he says he's got the right method for holding the pullies, and a how-to book at his side.
It all came down to the fact that one, I didn't have all the tools and would have to find between work, etc. to go to my dad's house (hour away) to do it. I also had already did almost the whole jump before (the belt,etc.) and didn't feel like doing it again. So I paid a shop to do it, not because I can't do it, but because I didn't want to do it. If I had decided to do it myself, it would have cost me the same in lost time from work and I would have had to do the work to the car, so that wouldn't have made much sense, now would it?
I understand that you are sorta trying to help on here BUT you're not doing anything that any of us can't do, though you've got a bad attitude. I and others on here would love to do without your advice if it means we can do without your attitude. Now if you want to have a good attitude, then I welcome you with open arms.
And really ANYONE can work on a car. Now total retards will screw up there stuff no matter what and they deserve to, so all those cases you listed (except the girl dieing), they are just getting a lesson to not be so stupid next time and to follow some good directions and not just go at it without knowing what to do. I didn't do anything to a car, except change a flat tire,etc. before I got my car but I learned quickly how to do work to it. If you want to do something, you'll learn how to do it. You may not be the best, but you can get close with practice. Or you can believe that you can't really do anything you want in life and you'll end up not living up to your potential, but that's not cool.
You can deny it all you want, but you are trying to start arguements just as much if not more so than me. Get used to it, people are going to disagree with you on here, and they are going to post it. Don't get so grumpy about it when it happens and it won't turn it to a big deal.
I guess we'll just have to see how you act in future posts, I'm done arguing with you.
98.5 SVT
91 Escort GT (almost sold)
96 ATX Zetec (i brake to watch you swerve)
FS: SVT rear sway bar
WTB: Very cheap beater
CEG Dragon Run - October 13-15
|
|
|
|
|