Those recharge kits are very easy to use. I recharged my sisters Altima with one. They have step by step instructions on the back. The hose will only fit on the low pressure side. So you don't have to worry about putting it in wrong. Basically how you do it is:
Hook hose up to low pressure side
Screw R135 can onto hose but dont puncture yet.
Start car with A/C on max
Read gauge to see how low it is.
Screw hose shut off valve all the way in to puncture the can
Then back out the shut off valve to open the can into the system.
Dont open the valve all the way. Just about half way. If you open it all the way the gauge will spike all the way into the red.
Let the system fill then close the shut off valve.
Unhook hose from the car
Former owner: 1999 Contour SE Sport
Current: 2000 Eclipse GT
There are three ways to do things: the right way, the wrong way, and the Max Power way!
Isn't that just the wrong way?
Yeah, but faster!
| 
