Register Log In

Contour Enthusiasts Group Archives Forums General Troubleshooting auto tranny holding 3rd gear for an extra 750 rpm

Print Thread

auto tranny holding 3rd gear for an extra 750 rpm #944986 05/02/04 04:45 PM
Joined: Mar 2003 Posts: 24 Hayes Va A actionpaintball OP New CEG\'er
OP actionpaintball New CEG\'er A Joined: Mar 2003 Posts: 24 Hayes Va	Had the O/d light blinking probelm and threw in the TSS and a new Range selector-shift better but hold about 750 RPM's more than normal before shifting into 4th gear-really Rev's high. It helps if I let off teh gas momentarily-then it will go into 4th. Any suggestions? Thanks ~TIM~

Re: auto tranny holding 3rd gear for an extra 750 rpm #944987 05/04/04 07:12 PM
Joined: Mar 2003 Posts: 24 Hayes Va A actionpaintball OP New CEG\'er
OP actionpaintball New CEG\'er A Joined: Mar 2003 Posts: 24 Hayes Va	Tranny shop said it threw codes P0732 and P0734 they quoted me 2800 bucks for a rebuild! Anyone experience these codes? It seems they might be caused by a torque converter malfunction of the main wiring harness to the tranny.

Re: auto tranny holding 3rd gear for an extra 750 rpm #944988 05/04/04 08:06 PM
Joined: Mar 2003 Posts: 7,117 West Palm Beach, FL - Going to... T TourDeForce Hard-core CEG'er
TourDeForce Hard-core CEG'er T Joined: Mar 2003 Posts: 7,117 West Palm Beach, FL - Going to...	Model year? Engine? Must be that jumbly-wumbly thing happening again.

Re: auto tranny holding 3rd gear for an extra 750 #944989 05/04/04 10:08 PM
Joined: Mar 2003 Posts: 24 Hayes Va A actionpaintball OP New CEG\'er
OP actionpaintball New CEG\'er A Joined: Mar 2003 Posts: 24 Hayes Va	4 cylinder 1998 2.0 liter cd4e The shop said one of teh bands was burned-but the fluid is still really red-not black like other blown trannies I have seen...is there a way to test the valve body? Or should I just try swapping it after I check all electrical connections?

Moderated by horseydug_dup1, Ray_dup1

Link Copied to Clipboard

Powered by UBB.threads™ PHP Forum Software 7.7.5