Register Log In

Contour Enthusiasts Group Archives Forums General Troubleshooting need help

Print Thread

need help #63188 06/13/02 06:36 AM
Joined: Jun 2002 Posts: 12 Surrey B.C. Canada G gleschu OP Junior Member
OP gleschu Junior Member G Joined: Jun 2002 Posts: 12 Surrey B.C. Canada	97 Contour v6 duratec.Hesitating when accelerating..cel light on. code P0304(misfire cyl #2)checked spark plug wires ok. cleared code and test drive..cel flashes and then stays on...code P0300(random misfire). Cleared cel and ran in idle for ten minutes revving her up every so often..cel on again..codes P0171/P0174(bank 1 and 2 lean)any suggestions.I swear to god this is the last ford I will ever buy. Mr Ford and the CARB should really try to understand how much grief this little cel light causes. NOTE a recent survey in canada found that 60% of "service techs" don't fully understand obd-II systems. gleschu. gleschu

Re: need help #63189 06/13/02 06:51 AM
Joined: Aug 2001 Posts: 785 St. Cloud, FL C carrot_top Member
carrot_top Member C Joined: Aug 2001 Posts: 785 St. Cloud, FL	have you changed the plugs, fuel filter ? Red '97 GL Sport MTX IVELISE ================================== "Let every nation know, whether it wishes us well or ill, that we shall pay any price, bear any burden, meet any hardship, support any friend, oppose any foe to assure the survival and success of liberty." John F. Kennedy

Re: need help #63190 06/13/02 05:07 PM
Joined: Jun 2002 Posts: 12 Surrey B.C. Canada G gleschu OP Junior Member
OP gleschu Junior Member G Joined: Jun 2002 Posts: 12 Surrey B.C. Canada	I changed plugs about six months ago as per service schedule. I will try changing fuel filter and if that does not help then plug wires. Gleschu gleschu

Moderated by horseydug_dup1, Ray_dup1

Link Copied to Clipboard

Powered by UBB.threads™ PHP Forum Software 7.7.5