Contour Enthusiasts Group Archives Forums Modifications Duratec Maintenance I need a list of tools.

I'm getting ready to replace my 17lb fuel injectors with the SVT 19lbers. I've got all the instructions to take me from start to finish, but I still need some additional help. I own ZERO tools. I'm going to need to borrow every single socket and driver to do this job. Is there anyone out there who can give me the complete list of tools needd to do this job, or at least point me in the direction of someone who can?

Thanks in advance,
Mark

Get a decent 1/4" metric socket set, and a couple of medium & large screwdrivers. I think a small pair of vice grips or pliers worked fine for the fuel line clamps. Just going from memory here, but I think those were the only tools needed to pull the UIM and the fuel rail. A set of (metric) combo wrenches would be good to have also. (8-15mm)

Unfortunately, getting a whole set is not something I can afford at this point. I was hoping for specifics....i.e., the UIM bolts are 10mm, the TB bolts are 12mm etc...becuase I think it will be easier for me to get my hands on 4 or 5 needed sockets as opposed to an entire set.