Previous Thread
Next Thread
Print Thread
Joined: Feb 2002
Posts: 130
E
Member
OP Offline
Member
E
Joined: Feb 2002
Posts: 130
How do you remove the front bumper on a '96 Mystique?

It can't be that different from removing one on a Contour...

Please advise.

Eurythmian laugh


'96 Oxford White Mercury Mystique "Spree"
Equipped with a stock 170hp Duratec 2.5L - V-6, 4 speed ATX
It's a Tubeless Tique!!! ( DFW will understand... )

Purchased NEW @ $18,756.00 on 1/11/97 with 25 miles on the Odometer for the wife.
Now has a little over 57,000 miles on it and it's my ride after getting the wife a 2000 Windstar SEL.
High Beam - Cool Blues in all four Head Lights.
885s in Fogs.
Head Light Switch Wiring Mod ? Can now run with Parks and Fogs together.
Updated the sound system and did sound proofing (What a difference!).

Dad of twins.

I'm such the family man.
Joined: Dec 2001
Posts: 365
E
Member
Offline
Member
E
Joined: Dec 2001
Posts: 365
Remove the front grille, and the right and left inner wheel well liner. This will give you access to the bolt on the top corners of the bumper cover, or at the bottom of the lip on the inside of the fender where the bumper and the fender meet.Thast about it just be care full cot to break any clips, if you do you can buy them at any parts store. Just look for the HELP rack its full of misc parts and clips for all makes and models. Good luck and be patient........ smile


98 LX,
Eibach`s ....
ICWrims / Potenza`s....
Svt kit w /duals...
BASF Extreme Ocean paint( complete color change)....
Bullit gas door....
Fuba DSM rear mount roof antenna....
Pre 98 trunk....
Blacked out headlamps, W/ Eyebrows....
A6 Side markers....
Shaved antenna and deck lid lock...
4 wheel disc brake conversion....
Magnaflow resinator....
SVT gauge cluster....(Yes the SVT gauge has a O/D light)....
Complete mesh grill treatment, Not gutter guard....
Titinaum window tint....
Burgman custom Power window & lock conversion....
More to come as soon as i complete this one.

Yeah its a LX but it has a 2.5 and it looks better then your ricer smile
Joined: Nov 2001
Posts: 370
J
Member
Offline
Member
J
Joined: Nov 2001
Posts: 370
I have heard you have to pull a couple of fuses or one of the battery terminals so the airbags dont go off. Is this true, cause I will be needing the same info for micahs bumper.


Chris Bertrand , !!16 years young!!
1995 Ford Contour Gl 2.5 V6 MTX
My DIMS (DO IT MYSELF) Achievements:
Performance Mods: None
Audio Mods:Jvc head unit, 6x9's in all doors , Sony XM-752EQX amp, 2 Sony Xplod LS-1235 12" Subs
Video Mods:Blaupunkt DVD-ME1, 2 5" monitors in sunvisors
Aesthetic Mods:Neons, Streetglow El Shift Knob
Commando LCD Pager Alarm
Many Mods To Come.......
Joined: Apr 2001
Posts: 219
I
Member
Offline
Member
I
Joined: Apr 2001
Posts: 219
on a contour 98+

THis is hooow I did it, It is my method and shoud not be taken as the word of FORD. I removed the grille by taking out the 2 screw on top of it. raised vehicle (Optional, my car is lowered) Pulled the two pastic fasteners out of the front bumper cover. Removed the screw that attaches the fender liner to the bumper in each wheelwell. now, there are 2 bolts on each side that go through the upper lip of the bumper into the fender. you can see them if you pull back the fender liner and look up and towards the fender. Unscrew these suns of *****es. Mine were a real mofo. Maybe if I sprayed them with some penetrator first smile There is also a plastic fastener in the center of the bumper on the bottonm side, It is through a small plastic support for the lower part of the bumper. remove this and Voila! the bumper should be free and come off with relative ease. Just take your time and move anything that is in your way while un screwing those tough bolts. I took off my wheels and also loosened u the fenderwell liner at it's frontward fastening points so that I could pull back the liner to gain better access.

I hoope this helps a little.

Good luck,

Chris.


99 Se,MTX,TS.
Formerly Dieter88, TbnPlr
NEW ding guards !!
Joined: Feb 2002
Posts: 130
E
Member
OP Offline
Member
E
Joined: Feb 2002
Posts: 130
Do you think this method will be about the same when removing a '96 Mystique front bumper?

Thanks for your help...
Eurythmian laugh


'96 Oxford White Mercury Mystique "Spree"
Equipped with a stock 170hp Duratec 2.5L - V-6, 4 speed ATX
It's a Tubeless Tique!!! ( DFW will understand... )

Purchased NEW @ $18,756.00 on 1/11/97 with 25 miles on the Odometer for the wife.
Now has a little over 57,000 miles on it and it's my ride after getting the wife a 2000 Windstar SEL.
High Beam - Cool Blues in all four Head Lights.
885s in Fogs.
Head Light Switch Wiring Mod ? Can now run with Parks and Fogs together.
Updated the sound system and did sound proofing (What a difference!).

Dad of twins.

I'm such the family man.
Joined: Apr 2001
Posts: 219
I
Member
Offline
Member
I
Joined: Apr 2001
Posts: 219
Hanes Manual quote.
REMOVAL

front bumper- 1995 through 1998

"1. apply parking brake, jack up the front of the vehicle and support it on jackstands
2. Where applicable, remove the foglights from the front bumper ( Me talking now, Just unplug them, it's easyier to take em out later smile )
3. Where applicabe, disconnect the tubing from the headlight washer jets.
4. Unscrew the screws securing the wheel arch liners to the front bumper
5. Unscrew the bumper mounting nuts, and withdrawl the bumper forwards from the vehicle, at the same time disconnecting the guides from the side pins"

sounds easier than a post 98!

later,

Chris


99 Se,MTX,TS.
Formerly Dieter88, TbnPlr
NEW ding guards !!
Joined: Feb 2002
Posts: 130
E
Member
OP Offline
Member
E
Joined: Feb 2002
Posts: 130
Thanks - you've been a big help.

laugh


'96 Oxford White Mercury Mystique "Spree"
Equipped with a stock 170hp Duratec 2.5L - V-6, 4 speed ATX
It's a Tubeless Tique!!! ( DFW will understand... )

Purchased NEW @ $18,756.00 on 1/11/97 with 25 miles on the Odometer for the wife.
Now has a little over 57,000 miles on it and it's my ride after getting the wife a 2000 Windstar SEL.
High Beam - Cool Blues in all four Head Lights.
885s in Fogs.
Head Light Switch Wiring Mod ? Can now run with Parks and Fogs together.
Updated the sound system and did sound proofing (What a difference!).

Dad of twins.

I'm such the family man.
Joined: Apr 2001
Posts: 219
I
Member
Offline
Member
I
Joined: Apr 2001
Posts: 219
your are welcome smile

Chris.


99 Se,MTX,TS.
Formerly Dieter88, TbnPlr
NEW ding guards !!

Moderated by  GTO Pete, Trapps_dup1 

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5