|
|
Joined: Nov 2000
Posts: 3,237
Member
|
OP
Member
Joined: Nov 2000
Posts: 3,237 |
Terry Haines Motorsports is ready to sell the Aussie bar now, he intends to order the Aussiebars from AAM, within the next week or so, so all you "big-talkers" need to act on your words and order the bar - no excuses. It will be sold for the time being with the same bushings etc., that I was originally selling them with, but Terry plans in the future to add upgraded endlinks and various other titbits to improve the performance and structural integrity of the whole rear suspension with the upgraded bar. That's not to say the bar can't be bought and installed now, cos it can. In the future you can always buy the upgraded endlinks and install them quickly, without having to remove the swaybar to do it. So I want to see some of you guys and girls cut the BS, and do me an Terry right. Both of us worked hard to get this thing designed, road tested and now marketed, to sell you all you CEGer's and Cougars boys and girls, so whip your check books out and order up. He has a Group Buy going in the group buy section of the CEG forums so hussle ladies and gentlemen. Alle alle! 
Regards, Anastazi Father of the Aussie Bar anastazi.sarigiannis@aam.com"Computer games don't affect kids. I mean if Pacman affected us as kids, we'd all run around in a darkened room, munching pills and listening to repetitive music." ----------------------------------- 2000 Silver Frost SVT #1126 of 2150 8" AFE/"Big-Mouth" Intake, Modified BAT Pipe, IAT Mod - A'PEXi S-AFC, Superchip, No Secondaries, Cobra/CSVT Hybrid MAF, Magnaflow True Duals, MYSTERY Mod, Autolite AWSF22FS's and FMS Wires, ES MM Inserts, Cross Drilled/Slotted Rotors w/ Greenstuffs, APR DTM Spoiler, Escort Cossie Vents, NACA Duct, Mirko Splitter, Koni's & H&R Springs, 24mm "Aussie" Sway Bar, 18" Enkei RS-5, 225/40R18 KDW-2's. Pioneer DEH-P7000R, TS-6975's, TS-6855's, MTX BE104, MTX Blue Thunder PRO502 http://www.geocities.com/qikslvrsvt
|
|
|
|
|
Joined: Oct 2001
Posts: 131
Member
|
|
Member
Joined: Oct 2001
Posts: 131 |
Originally posted by Aussie SVT: Terry Haines Motorsports is ready to sell the Aussie bar now, he intends to order the Aussiebars from AAM, within the next week or so, so all you "big-talkers" need to act on your words and order the bar - no excuses. I'm new to the board. Please tell me why this bar is better than the others. I have been told bigger isn't always better. Actually I heard that last night! 
|
|
|
|
|
Joined: Jun 2000
Posts: 1,038
Member
|
|
Member
Joined: Jun 2000
Posts: 1,038 |
the bar is friggin awesome.
have yet to hear anyone say anything bad about it.
|
|
|
|
|
Joined: Jul 2001
Posts: 425
Member
|
|
Member
Joined: Jul 2001
Posts: 425 |
Originally posted by Aussie SVT: Terry Haines Motorsports is ready to sell the Aussie bar now, he intends to order the Aussiebars from AAM, within the next week or so, so all you "big-talkers" need to act on your words and order the bar - no excuses. It will be sold for the time being with the same bushings etc., that I was originally selling them with, but Terry plans in the future to add upgraded endlinks and various other titbits to improve the performance and structural integrity of the whole rear suspension with the upgraded bar. That's not to say the bar can't be bought and installed now, cos it can. In the future you can always buy the upgraded endlinks and install them quickly, without having to remove the swaybar to do it.
So I want to see some of you guys and girls cut the BS, and do me an Terry right. Both of us worked hard to get this thing designed, road tested and now marketed, to sell you all you CEGer's and Cougars boys and girls, so whip your check books out and order up. He has a Group Buy going in the group buy section of the CEG forums so hussle ladies and gentlemen.
Alle alle! Sorry AussieSVT, got tired of waiting, so I ordered the BAT bar... now I'm waiting for that!! 
I heed the call of the curb
|
|
|
|
|
Joined: May 2000
Posts: 618
Moderator
|
|
Moderator
Joined: May 2000
Posts: 618 |
GOD BLESS AMERICA!!!
Ted
tdavidk76@hotmail.com
'95 SE • DOB-4/20/95 • every option • Champagne • Duratec • MTX.
Mods: Taylor wires • Bosch +4 • Eibach/Sachs Super Gas (half done) • rear BAT urethane bushings • SVT air box (thanx Dom!) • fogs w/parks • 885 50w fog bulbs • Ray's THF • rear dome • lighted moonroof switch(thanx again Dom!) • tranny cocktail • minor stereo mods.
Yet to install: Front Eibach/Sachs • Front BAT urethane swaybar bushings.
|
|
|
|
|
Joined: Nov 2000
Posts: 3,237
Member
|
|
OP
Member
Joined: Nov 2000
Posts: 3,237 |
Originally posted by Xeno-tour:
Sorry AussieSVT, got tired of waiting, so I ordered the BAT bar... now I'm waiting for that!! Xenotour - Cancel your order. I originaly waited 3 months for a BAT bar and then I got fed up and decided to design my own. SHOvs SVT - just do a search in the performance section for 24mm hollow sway bar and you'll find all the info you could possibly want in my thread in there, including calculations and comparisons between my bar, the stock bar and other after-market sway bars. tdavik - the price is listed in the Group Buy section.
Regards, Anastazi Father of the Aussie Bar anastazi.sarigiannis@aam.com"Computer games don't affect kids. I mean if Pacman affected us as kids, we'd all run around in a darkened room, munching pills and listening to repetitive music." ----------------------------------- 2000 Silver Frost SVT #1126 of 2150 8" AFE/"Big-Mouth" Intake, Modified BAT Pipe, IAT Mod - A'PEXi S-AFC, Superchip, No Secondaries, Cobra/CSVT Hybrid MAF, Magnaflow True Duals, MYSTERY Mod, Autolite AWSF22FS's and FMS Wires, ES MM Inserts, Cross Drilled/Slotted Rotors w/ Greenstuffs, APR DTM Spoiler, Escort Cossie Vents, NACA Duct, Mirko Splitter, Koni's & H&R Springs, 24mm "Aussie" Sway Bar, 18" Enkei RS-5, 225/40R18 KDW-2's. Pioneer DEH-P7000R, TS-6975's, TS-6855's, MTX BE104, MTX Blue Thunder PRO502 http://www.geocities.com/qikslvrsvt
|
|
|
|
|
Joined: Sep 2000
Posts: 5,805
Member
|
|
Member
Joined: Sep 2000
Posts: 5,805 |
V6 MTX
'Don't p**s up my back then tell me it's raining!!!"
'Its only nuts & bolts!'
'If I build it,fix it,upgrade it or modify it...MAYBE they will come....!
Haines Motor Sports Inc,
Dealer for 'Quaife America' & 'Autotech Sport Tuning'
SOLE USA Dealer for the American Axle 'AUSSIE BAR'...
Get a Turbo for you Zetec from HMS Inc...by 'The Demon' ...www.DemonDynamics.co.uk
..don't talk about it DO IT !!!
|
|
|
|
|
Joined: Nov 2000
Posts: 3,237
Member
|
|
OP
Member
Joined: Nov 2000
Posts: 3,237 |
For the love of God people. Stop beating around the bush - "let the boy sleep in your bed!"  *Farley/SNL reference* Seriously though! You CAN install the sway bar with the stock Bracket and upgraded bushing in your driveway. THEN if you want to upgrade the brackets with Terry's up and coming backing plates etc, you can retrofit them later. Just order the bar before AAM says "forget about it" - honestly so many people wanted it, and now it is available - NOTHING. Makes me wonder why I bother! :rolleyes:
Regards, Anastazi Father of the Aussie Bar anastazi.sarigiannis@aam.com"Computer games don't affect kids. I mean if Pacman affected us as kids, we'd all run around in a darkened room, munching pills and listening to repetitive music." ----------------------------------- 2000 Silver Frost SVT #1126 of 2150 8" AFE/"Big-Mouth" Intake, Modified BAT Pipe, IAT Mod - A'PEXi S-AFC, Superchip, No Secondaries, Cobra/CSVT Hybrid MAF, Magnaflow True Duals, MYSTERY Mod, Autolite AWSF22FS's and FMS Wires, ES MM Inserts, Cross Drilled/Slotted Rotors w/ Greenstuffs, APR DTM Spoiler, Escort Cossie Vents, NACA Duct, Mirko Splitter, Koni's & H&R Springs, 24mm "Aussie" Sway Bar, 18" Enkei RS-5, 225/40R18 KDW-2's. Pioneer DEH-P7000R, TS-6975's, TS-6855's, MTX BE104, MTX Blue Thunder PRO502 http://www.geocities.com/qikslvrsvt
|
|
|
|
|
Joined: Apr 2001
Posts: 11
Junior Member
|
|
Junior Member
Joined: Apr 2001
Posts: 11 |
Ok, fine... so let's buy it. But where? How? Got a link? Phone #? --Dave Originally posted by Aussie SVT: Terry Haines Motorsports is ready to sell the Aussie bar now, he intends to order the Aussiebars from AAM, within the next week or so, so all you "big-talkers" need to act on your words and order the bar - no excuses. It will be sold for the time being with the same bushings etc., that I was originally selling them with, but Terry plans in the future to add upgraded endlinks and various other titbits to improve the performance and structural integrity of the whole rear suspension with the upgraded bar. That's not to say the bar can't be bought and installed now, cos it can. In the future you can always buy the upgraded endlinks and install them quickly, without having to remove the swaybar to do it.
So I want to see some of you guys and girls cut the BS, and do me an Terry right. Both of us worked hard to get this thing designed, road tested and now marketed, to sell you all you CEGer's and Cougars boys and girls, so whip your check books out and order up. He has a Group Buy going in the group buy section of the CEG forums so hussle ladies and gentlemen.
Alle alle!
|
|
|
|
|
