|
|
Joined: Aug 2000
Posts: 62
Member
|
OP
Member
Joined: Aug 2000
Posts: 62 |
I have been looking for a long time to find someone that is competent enough to produce some quality craftsmanship. I have found an engineer that used to work for Addco, a very reputable company that develops race components. He has agreed to make rear sway bars (22mm) with all mounting and urethane bushings. If I can get at least 10 people, including myself to cough up $150 plus shipping, he will produce. I gave him my word that I would find him customers, so we can have that price. The orders do not have to be made all at once. This is guaranteed to be made immediately following the order. No back orders!!! Top quality work for a very reasonable price. Help me help you and e-mail me with your order request. He can also make strut bars for around $85. All will be a perfect fit. He has toyed with the option of having an adjustable rear bar, contact me if you are interestes. svtsethj@aol.com
------------------
98 SVT
Silver Frost
SCCA Club Racing Showroom Stock
Six point roll cage
Five point Simpson safety harness
Momo racing seat
17" O.Z. Racing wheels "Montecarlo"
3" cat back exhaust
Supertrapp 5" muffler
Eibach springs
Urethane bushings
Extrudehone enhaced upper intake
Superchips
Unorthodox underdrive crank pulley
A bunch of bushings
Euro gearbox
Maybe some other secrets...
2nd & 3rd cars are Mercedes Benz, Speed World Challenge race cars.
|
|
|
|
|
Joined: Sep 2000
Posts: 4,527
Administrator
|
|
Administrator
Joined: Sep 2000
Posts: 4,527 |
I would be interested, but I don't have the cash right now (I'm getting married next month) so if this drags out far enough, I might get one 
It's all about balance.
bcphillips@peoplepc.com
|
|
|
|
|
Joined: Jul 2000
Posts: 610
Member
|
|
Member
Joined: Jul 2000
Posts: 610 |
i am interasted in both as long they are aluminum at least in color, if there is a choice of colors yellow is a good one
------------------
2000 se
kkm intake
blauplunkt cd stereo-coming out soon, being replaced with a pioneer
green interior lights
(alot more to come)
1999 se (no mods yet, intake on the way
email-jessneric@peoplepc.com
yahoo instant messanger-eric_j_linders
capitol ceg/southern maryland
2000 se tropic green
kkn intake(will replace with svt soon), green interion lights(replacing with neons), pioneer 4100-no remote, fog light mod, svt exhaust, side markers, badgeless, 9005 instead of 9006(headlights will be replaced soon, pioneer 6x8 3 way(front) and 2 way(rear)
need to istall-obx pedels
1999 se steel blue
blue headlights and fog lights
need to install sony cd headunit
email-jessneric@peoplepc.com
yahoo im-eric_j_linders
aol im-ericsgreen00
msn im-ericsgreen00@altavista.com
|
|
|
|
|
Joined: May 2000
Posts: 2,166
Moderator
|
|
Moderator
Joined: May 2000
Posts: 2,166 |
I have Addco in my 510, and if they made it for the contour, I'll will definately be in that also... *Front and rear if possbile* ------------------ David Z. Silver E1 #4808 w/stuff http://daplace.spedia.net [This message has been edited by david z (edited October 12, 2000).]
|
|
|
|
|
Joined: Aug 2000
Posts: 508
Member
|
|
Member
Joined: Aug 2000
Posts: 508 |
He can also make strut bars for around $85. All will be a perfect fit. He has toyed with the option of having an adjustable rear bar, contact me if you are interestes. svtsethj@aol.com
[/B][/QUOTE]
I'd be interested in getting the STB for the front and rear.
NP-T Speed Factory Intake
Magnaflow Race Canisters
NP-T Sniper Intake Pipe
Optimized 4.6 GT TB
Vision Driving Lights
Lo-Tek Pillar Pod
FMS Blue Wires
Clear Corners
Short Shifter
Side Markers
Bullit Door
|
|
|
|
|
Joined: Sep 2000
Posts: 38
Member
|
|
Member
Joined: Sep 2000
Posts: 38 |
I hate to be the bearer of bad news, but the units from SP and BAT (I did not check BAT, but from memory they were similar) are running at 110.00
Tony
------------------
AntMowery@worldnet.att.net
98 SE V6 MTX
SVT KKM intake, Pro Flow 75mm, No Resonate, VooDoo Knob, Fog Fix
Headlight fix, 16 in Cougar wheels, SMA strut towers bars, SVT
exhaust
SMA straight intake, B+M edge, Bosch +4
86 MR2
AntMowery@worldnet.att.net
98 SE V6 MTX
SVT KKM intake, Pro Flow 75mm, No Resonate, VooDoo Knob, Fog Fix
Headlight fix, 16 in Cougar wheels, SMA strut towers bars, SVT
exhaust
SMA straight intake, B+M edge, Bosch +4
86 MR2
|
|
|
|
|
Joined: Aug 2000
Posts: 2,961
Member
|
|
Member
Joined: Aug 2000
Posts: 2,961 |
A Mowery is right, the Strut braces at $85 are a deal, the sway bar at $150 is not. I'd be willing to do front brace for sure, rear would depend on precise measurements. If I can fit it, yes on that too!
------------------
I don't have a personality. I have an attitude
Ross 1998 E0 SVT T-Red
You can pillage an enemy once, but a customer is an endless resource.
James Oerichbauer - PFPC Global Fund Services
Ross: 1998 E0 SVT Contour, Toreador Red, Konis, Superchip, KKM w/heat shield, SHO-shop y-pipe and rear strut brace, no res, ScotchCal, Moda Sport 16x7.5 wheels with 205/55ZR16 Dayton Dayton tires... more
|
|
|
|
|
Joined: Aug 2000
Posts: 62
Member
|
|
OP
Member
Joined: Aug 2000
Posts: 62 |
I understand that others have offered them for less, but the trouble is having them produce. I had one on order from SCA for 3 weeks until they told me it would be at least another 2 months before they would get it to ship to me. This guy does very good work. He is not just another montal bender. $150 is a great price when he will produce immediately! Remember he is doing an exact fit with brackets and bushings included. You need to e-mail me direct if you definately want to order. svtsethj@aol.com
------------------
98 SVT
Silver Frost
SCCA Club Racing Showroom Stock
Six point roll cage
Five point Simpson safety harness
Momo racing seat
17" O.Z. Racing wheels "Montecarlo"
3" cat back exhaust
Supertrapp 5" muffler
Eibach springs
Urethane bushings
Extrudehone enhaced upper intake
Superchips
Unorthodox underdrive crank pulley
A bunch of bushings
Euro gearbox
Maybe some other secrets...
2nd & 3rd cars are Mercedes Benz, Speed World Challenge race cars.
|
|
|
|
|
Joined: Jul 2000
Posts: 463
Member
|
|
Member
Joined: Jul 2000
Posts: 463 |
If the price was lower to about $115~$120, then I might consider.
$150 is too expensive for me.
|
|
|
|
|
Joined: Jul 2000
Posts: 1,496
Member
|
|
Member
Joined: Jul 2000
Posts: 1,496 |
I'm giving SPMotorsports another week to give me a definite ETA, and if they reply with "2 more weeks" like they've been doing for the PAST 2 months, I'll definitely send my business to your man. My patience is gone, to say the least. I'm tired of waiting. Talk to your man about the price, though. $150 is a bit steep. $125-130 sounds about right. I'm in favor of profit margins in all, but close to double is stretching it... $150 including shipping? I'll do that... ------------------ James TompkinsTulsa, OK loken@ionet.net 99 Red Rocket SVT #143/2760 Modded to Taste... 00 Corvette Coupe (loan) Modded for Haste...
JaTo
Overland Park, KS
JaTo@kc.rr.com
99 Contour SVT
#143/2760
Modded to Taste
00 Corvette Coupe
Modded to Haste
|
|
|
|
|
