Contour Enthusiasts Group Archives Forums General Troubleshooting i know its asking a lot?!

i know it may be easier asked than done, but is there any way that someone could take a picture of what the IMRC is so i can check it if that is possible? I know what it stands for, I Just need to know where it is at for one and if i can do anything to check if it is indeed my problem.
thanks for any help that i get in advance!

Under there.. remove the three bolts (7mm IIRC)

Check to make sure the cable coming out the right side (runs to a linkage down under the Throttle Body) is still connected at that linkage, and that it is pulling that linkage open at 3800-4000RPM.


Ray

Try this.

Originally posted by Tony2005:

---

It is located under the WP cover (the black plastic cover to be removed with three 7 mm bolts).

Edit. From Ray's UIM/LIM rebuild with pics.

http://img256.echo.cx/my.php?image=cover2vd.jpg

---

Edit. This thread will help.

http://www.contour.org/ubbthreads/showflat.php?Cat=&Board=trouble&Number=1053502&page=&view=&sb=5&o=&fpart=1&vc=1