I just got a 95 dodge intrepid with the 3.5 and atx Everything works fine but there is no reverse. Does anyone have the ability to scan the computer on this? I would appreciate it and buy lunch beer ect

A Friend of mine had a 95 ATX also and his reverse went and had to pay almost 3k to get it fixed. They told him that if he got it fixed as soon as it went out it would have ran him aobur 1100. he waited till it had to be towed in.

OBD-I can be read via a jumper on the OBD-1 connector.

it makes the CEL flash the code.

flash-flash-pause-flash-long pause = 21 = OBD code 2-1, or 21.


Ray

AutoZone will read codes for free! Just stop by one of their stores.

Marty

Autozone only reads OBD2 aka 1996 or newer cars and some 1995 cars. The car isn't registered or insured and reverse kinda works on flat fround if the car is reved up really high. I did the key on off sequence for chrysler cars and all I got was code 12 and 55 which is battery disconnected within the last 60 cycles and end of codes.

Originally posted by 96mercury:

---

Autozone only reads OBD2 aka 1996 or newer cars and some 1995 cars.

---

Doh! Bummer. I did not know that.

Marty