• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

Window switch lights

mystiquevltwin

Hard-core CEG'er
Moderator
Joined
Jan 27, 2005
Messages
3,263
Location
Pittsburgh, PA
I searched everywhere about this and I haven't come up with anything.

Does anyone have a how to, or can at least tell me the bulb size for the lights to change the color of the lock/unlock and window switches?
 
I am going to radio shack tom I just took one apart lol I will do a nice how to on this when completed
 
Good question. Did you find out the answer, because I'm curious too. I tryed taking out my switches a few weeks back to check them out, but I couldn't get them even open....
 
There are very tiny LED's in each switch. You need to get a small screw driver and pry the switch apart to get it apart. Once in there you can solder in your led and resistor. The how-to I posted above was for something else.

Some modification to the innards of the switch may be necessary depending on the led size.
 
I have detailed piks and writeup of mine if you would like I can add it to the how to's
 
Back
Top