blu_fuz
New Member Classroom vulture
So I need to make some fuel lines but I need the fittings that are "hard plumbed" to the car in the engine bay. I need as long of fuel hose that can be left on the fitting as possible.
You can see there are male/female spring held fittings here on my '95 fuel rail. The fittings have a barbed end on them for the hose to slip over. I need those fittings and (if possible) as much hose from the fitting to the fire wall as I can get.
Thank you!
The '95 fuel rails have the male end on a whip of hose like the picture shown. I know the 98 and newer has the male end as all one piece with the fuel rail, so those won't work. So, if you have a '95 (possibly 96 and 97 too) return style, you can cut these connectors off for me!
You can see there are male/female spring held fittings here on my '95 fuel rail. The fittings have a barbed end on them for the hose to slip over. I need those fittings and (if possible) as much hose from the fitting to the fire wall as I can get.
Thank you!
The '95 fuel rails have the male end on a whip of hose like the picture shown. I know the 98 and newer has the male end as all one piece with the fuel rail, so those won't work. So, if you have a '95 (possibly 96 and 97 too) return style, you can cut these connectors off for me!