OK need some help, replaced the motor out of my pre 98 csvt with another 2.5. Since changing motor, it just cranks and gets no spark or fuel, I posted it on fbook and have eliminated everything everyone has told me. Can't hear fuel prime, PATS flashes rabidly, checked grounds, 3 connections on pass side are all good and connected. Car sat for 2years before getting the new motor put in, do have some dry rot on a few connectors. Need as much help as I can get to get her back on the road and not a lot of csvt owners in SE Kentucky! Thanks
-
Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.
You can register to join the community.
Replaced motor No spark/ No fuel 2.5csvt
- Thread starter Drew_Ky
- Start date
ContourGuy9817
Hard-core CEG'er
pats flashing rapidly means tow to dealer and have keys programmed
Already had a guy come hook computer up, key is programmed and reading fine.
blu_fuz
New Member Classroom vulture
'Had a guy come hook computer up' is not the same as towing it to a dealer. If your pats light is blinking like that, and you think you have tried everything, then take it to a dealer.