RawBurt
Hard-core CEG'er
What PCV are you guys with the turbos and s/c's running? Lightning? Supercoupe? p/n's and year are helpful.
-
Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.
You can register to join the community.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Pcv
- Thread starter RawBurt
- Start date
warmonger
Hard-core CEG'er
What PCV are you guys with the turbos and s/c's running? Lightning? Supercoupe? p/n's and year are helpful.
Stock. Just got to find a good one that seals.
Remember, the pcm is calibrated for the size of the engine so a v8 pcv may/maynot be too big.
From my experience the lightning ones don't seal up perfectly well either. I've found good ones just by opening the package at Autozone and blowing through till I found one that sealed.
Stazi
Veteran CEG'er
Yep, do what Tom said. I used a good ol' FRAM Litghning one with the included adapter to connect the UIM hose and the Carbon Cannister hose, a la, Contour V6.
Remember, regardless of the PCV, if you vent the valve covers to Atmosphere, at any vacuum it suck air through the PCV like mad and give you a lean condition.
Remember, regardless of the PCV, if you vent the valve covers to Atmosphere, at any vacuum it suck air through the PCV like mad and give you a lean condition.
RawBurt
Hard-core CEG'er
Well thats what I did, I went to autozone and just started opening them to find which one seals the best. I have no idea what car the one I ended up getting was for.
Stazi
Veteran CEG'er
Could you tell the one I tested with my ass, by taste?:laugh:Well thats what I did, I went to autozone and just started opening them to find which one seals the best. I have no idea what car the one I ended up getting was for.