• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

How to: Removing door panel?

Westwildcat

CEG'er
Joined
Nov 9, 2011
Messages
240
So I need to replace the speaker grills in my 99 Contour SVT and the person who had the car before me busted them out to get new speakers in. I was wondering if someone has done this if they could kinda of walk me through the process of doing this?

Thanks
 
its pretty easy, just remove the screws around the outside of the door panel. remove trim around the doro handle, one screw and its clicpped in, remove the inside "sale panel" again one screw under the cover. then remove the cover to the handle and take two screws out. in addition there is one more under a cover. then just lift the cover off.

shoudl be able to find all of that in a service manual also.
 
another tip about the door handle cover... there is a small, square access hole below the cover. you can get a small flat-head screwdriver in there and pop the cover off without damaging the sides.
 
Back
Top