LCA Fabrication - Who To Ask

[JCTH1]

Being that im in england and my £ works out better value to the $ i was wondering if theres any guys here on CEG who would possibaly look at Fabricating a pair of LCA's for me if they approve my design.

They would consist of a rose jointed section for camber adjustment and also a poly section to obviously take the flex in the suspension.

IVe already PM'd someone but i know theres gotta be loads of ppl on CEG who can do it. I am already in possesion of a pair of rear sway arms with rose jointed adjustments. Top Quality work and only cost me £85 S/H from a meg'er.

jcth1

 

[ohsigmachi]

Sorry, but could you explain "rose jointed" I think its a Brit term and I'm a silly yank!

 

[Livinsvt]

Sorry, but could you explain "rose jointed" I think its a Brit term and I'm a silly yank!

Lol, rose joints = heim joints. It has to be way cheaper and easier to have someone in the U.K. build them for you. 2 bolt or 4 bolt? You don't want to much camber adjustment from the lca due to changing the angle of the cv joint.

 

[LOUDSHO92]

I could have it done so long as they would work with US applications. There wouldnt be a rose joint as we have a similair design on SHO models and it does fine.

 

[JCTH1]

I could have it done so long as they would work with US applications. There wouldnt be a rose joint as we have a similair design on SHO models and it does fine.

Im right in thinking rose joint is a screw thread which locks into place via two hex bolts.....similar to how steering joints are on between the rack and hub (the adjustable bit for tracking)

With regards to adjustment its just to bring camber back to where it will meant to be because lowering it throws it right out.

jcth1