Power window wiring-diagram

[CSVTnewbie]

Car is 98 Contour SVT.

Problem: front passenger window only rolls down, not up. Replaced the switch and still the same. Driver side master switch does not work for front passenger at all.

My solution: rewire the harness from the power window switch directly to the wires of the motor.

All I need to know is which wires in the power window switch harness make the window go up/down so I can make my own harness and bypass the faulty harness.

Any help is greatly appreciated!

 

[SVT Loki]

Before you go re-wiring, why not just pick up a used master switch to see if thats the problem?

 

[CSVTnewbie]

Thanks Loki you were right. Man I feel like a ing newb.

 

[SVT Loki]

Thanks Loki you were right. Man I feel like a ing newb.

:laugh: No worries.

Also keep in mind that the master switch won't work on any window without a switch connected, it needs to be bridge to work. (I.E. you can't use the master on the passenger window if there is no switch or bad connection on the passenger window)